ROWENTA NOMAD HAIR CLIPPER
NOMAD HAIR CLIPPER PERFECT CUT IN AN EASY WAY
The high-quality Nomad hair clipper is the effortless solution for your haircut. With 19 different cutting lengths and a sleek design, perfectly precise trimming is made easy - anytime and anywhere.
Référence : TN1400F0
ProductBenefits
Voir la description du produit
PERFECTLY CUT HAIR WITH EASE
The Nomad hair clipper provides an effortless haircut, with superior-quality stainless steel blades for flawless, long-lasting cutting efficiency.
Two adjustable combs provide a range of 19 cutting lengths from 3 mm to 30 mm, while a 1.5 mm precision setting yields perfectly desired styles. Easy to use and featuring a sleek design, Nomad is your ideal hair trimming solution for a sharp-looking cut anytime, anywhere.
Voir la description du produit
Technical specifications / comparison
| CUTTING PERFORMANCE | |
| Blade material | Stainless steel
|
| Motor type | DC motor
|
| Motor speed (rpm) | 6250
|
| Speed settings | 1
|
| PRECISION | |
| Minimum cutting length | 1
mm |
| Precision setting | 1.5
mm |
| Cutting length indicator | Comb
|
| 1,5 mm
|
|
| Zones | Hair
|
| USAGE - CUTTING STYLES | |
| Hair comb type | Adjustable
|
| Hair comb | 2
|
| Hair cutting length adjustment range | 1 to 30
mm |
| Hair cutting length positions | 19
|
| 40 min
|
|
| Standard (NiMH)
|
|
| Men
|
|
| Autonomy | 40 min
|
| Charging time | 8
h |
| Power | Cordless + corded use
|
| Battery type | NiMh
|
| COMFORT OF USE | |
| Detachable cutting head |
|
| Cleaning set | Oil + brush
|
| Charging indicator | LED
|
| Technical specifications | |
| Colours | White
|
| Voltage | 100-240
V |
|
|
Voir les documents liés
Voir les questions les plus fréquentes
FAQ
No. It is advisable not to use the clippers on yourself - this is for safety reasons and also to ensure a better finish.
No. The clippers cannot recharge and be in use at the same time.
It is advised to use the hair clippers on clean but dry hair.
Before using the clippers for the first time charge the appliance for 14 hours. The next 3 times you use your clippers, it is important to let it run-down completely. The recommended charging time is 8 hours thereafter. When the charging indicator is red, your appliance is charging.
On a purely performance level it is important that you lubricate the blades every 2/3 times the clippers are used. Use the lubricating oil supplied or a quality oil that contains no acid (e.g. sewing machine oil). Place a single drop on each end of the blade, operate the clippers for a few minutes and then wipe off any excess oil with a cloth.
Our clippers seldom require cleaning (unless they have been used on multiple people). The blades must be cleaned using the small brush after each use. Similarly, you can also use the small brush to remove hair from the comb.
No. For rechargeable models, you must use NiCd or NiMH rechargeable batteries. Do not use normal batteries, as they run the risk of melting.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
A Class I appliance must be earthed (and has only one insulation layer). A Class II appliance does not necessarily have to be earthed because it has two distinct and independent insulation layers.
No. Our clippers can only be used on hair. Any other use may lead to the deterioration of the appliance or injury.
If the clipper is rechargeable, the battery will last for 40 minutes after a full charge.
The micro setting adjusting wheel lets you precisely adjust the cut length, thus providing an impeccable finish to hair or beard trims.
The various lengths are as follows:
• Position 1 = 0.8 mm
• Position 2 = 1.1 mm
• Position 3 = 1.4 mm
• Position 4 = 1.7 mm
• Position 5 = 2.0 mm
The various lengths are as follows:
• Position 1 = 0.8 mm
• Position 2 = 1.1 mm
• Position 3 = 1.4 mm
• Position 4 = 1.7 mm
• Position 5 = 2.0 mm
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
-
Product Categories
-
Enjoy
-
