ROWENTA X-plorer Serie 95 Animal

X-plorer Serie 95 Animal
5 times more powerful* for performance that rises to any cleaning challenge

The Rowenta X-plorer Serie 95 Robot Vacuum Cleaner is a game-changing home cleaning solution: all the convenience of automatic robot cleaning with deep-cleaning results at uncompromising standards of quality. An extra-powerful BLDC motor (up to 8000Pa) delivers impressive suction with total ease, bringing together 4-in-1 cleaning action with cutting-edge navigation and mapping technology. The result is an intuitive modern cleaning experience that leaves your entire home spotless.

Référence : RR7975WH

Where to buy

*Maximum motor suction power of 8000Pa vs. 1500Pa for X-plorer Serie 20

ProductBenefits

Uncompromising performance

The best of both worlds: all the convenience of a robot vacuum cleaner and exceptional deep-cleaning performance, thanks to an extra-strong BLDC motor offering vacuum suction up to 8000Pa.

4-in-1 cleaning action

Two side brushes for corners and edges, three central brushes for all surfaces and needs including animal clean-up, a BLDC motor for impressive suction and the Aqua Power System to mop surfaces clean.

High-tech navigation

Automatic cleaning designed to cover every inch of your home environment, with cutting-edge technology for ultra-accurate navigation, permanent mapping and personalized settings.

Electric mop control

Detects any traces of humidity to ensure your carpets stay dry and to keep your docking station safe and clean.

10-year repairable product

Rowenta has committed to offering all spare technical parts for nearly its entire range of products for 10 years after purchase on average, doing our part to protect the environment and fight waste.

Enhanced silence technology

Automatic cleaning has never been smoother, with enhanced silence technology offering a more comfortable and less intrusive cleaning experience for the whole family.

The Rowenta X-PLORER Serie 95 Robot Vacuum Cleaner

Bringing together ultra-high-tech design with extra-powerful cleaning performance, the Rowenta X-PLORER Serie 95 Robot Vacuum Cleaner is an expert cleaning solution that delivers premium results with modern convenience. This cutting-edge go-anywhere automatic vacuum cleaner is equipped with state-of-the-art technology for 4-in-1 cleaning action: two side brushes for corners and edges, three central brushes to cover all surfaces and cleaning needs, an extra-strength BLDC motor for reliable deep-cleaning suction up to 8000Pa, and the Aqua Power System to mop surfaces clean. The free app puts ultra-accurate navigation and personalized home mapping in the palm of your hand and is fully voice-assistant compatible (Google Assistant, Amazon's Alexa). An impressive array of enhanced features—including special coverage for pet owners, more silent cleaning, and more—come together in one automatic deep-cleaning package, for uncompromising quality and a spotless home day after day.

Technical specifications / comparison
X-plorer Serie 95 Animal
X-plorer Serie 95 Animal
Cleaning performance
Technology Rotative central brush  
Type of brush Animal Electro-brush  
Lateral brush 2  
Motorization Brushless motor  
Cleaning modes Customized (cf. permanent map)  
Power levels 4  
Your habits Automatic and effortless cleaning  
Vacuum cleaning efficiency Best-in-class (>=4000 Pa)  
Mopping Electronic  
Navigation
Multi-room management    
Obsctacles management Standard (Obstacle detection >10 cm)  
Stairs management Yes: 3 drop sensors  
Virtual barrier Yes: via Application  
Level of room coverage (Navigation technology) Best-in-class (laser or laser+camera)  
Home mapping in the App Room management and cleaning report  
Ability to go under low furniture Standard  
Connectivity
Scheduling    
Wifi connectivity (app Rowenta robots and vocal assistants)    
Scheduling
Selection of rooms to be cleaned Yes (customized cleaning)  
Autonomy
Battery type Lithium ion  
Charging time 4 hours  
Autonomy 225 min  
Quick charge battery    
Running time
Running time (min position) 225 min  
Charging type Docking station  
Self-Charging    
Charge and Go    
Equipment
Control system Yes: application  
Dust container capacity 0.5  L
Filtration Standard Filter  
Talking robot No  
Others Water tank + 2 mops included (1 Standard mop and 1 Animal scub mop)  
Water tank capacity 0.22  L
Ergonomics
Sound Level 53  dB(A)
Dimensions/ Weight
Dimensions ( ...x...x...) 35x35x10.3  cm
Design
Colours BLACK  
Specific need
Animal care    

Documentation

Download Safety instructions

Download Safety instructions
Download manual

Download manual
Download the conformity certificate

Download the conformity certificate
Warranty information

Warranty information

FAQ

Do not vacuum wet surfaces, any type of liquids, hot substances (embers, cigarettes), super fine substances (plaster, cement, ash, etc.), large sharp waste (glass), harmful products (solvents, abrasives, etc.), aggressive products (acids, cleaning products, etc.), inflammable and explosive products (oil or alcohol based).
Place the charging base station against a wall, on a flat surface and where the robot vacuum cleaner can easily find it.
This location must be free of any obstacles (including rugs). Leave at least 1,5 metre of space free to the left and the right, and 2 metres at the front of the base station. If the station is placed in a corner or difficult to find, the robot vacuum cleaner will not be able to reach it.
Place the base station's power cable along the wall.
For more information, refer to the instructions in your user manual.
Leave the charging base station plugged in permanently (the automatic recharge function will not be available if the charging station is not activated).
Yes, your robot vacuum cleaner is equipped with drop sensors that detect stairs and gaps.
However, in some situations, the sensors are not as efficient. For example, curved staircase edges, rugs next to stairs, slippery surfaces and obstructions might affect the sensors' performance.
Before running the robot vacuum cleaner ensure space has no obstacles, power cords, clothing, or other potentially dangerous objects which might cause the appliance breakdown or other accidents.
Yes, the robot can be charged on the charging station, even when the robot's main power switch is turned off.
Check that the switch underneath the robot is correctly in the 'ON' position.
Empty the dust container into a bin after each use. Clean the dust compartment seals with a cloth.
It is recommended to clean the central brush once a week.
For more details, please refer to the User Manual.
It is recommended to clean the filters at least once a week.
For more details, please refer to the User Manual.
It is necessary to clean left, right and front wheels regularly to remove entangled hair and threads.
It is recommended to wipe sensors and charging terminals (of the robot and charging base) with a clean dry cloth once a week.
Turn off the robot before cleaning the sensors and charging terminals.
Do not use any cleaning products to clean the robot vacuum cleaner.
For some parts you can use the water, for the others you can use the dry cloth only. For more details, refer to the instruction manual.
It is recommended to replace the fine dust and foam filter every 6 months.
The side brushes should be replaced by new every 6 months.
Do not use your appliance. In order to avoid any danger, you must have them replaced by an approved vacuum repair company.
Do not use your appliance. To avoid any danger, do not touch the terminals. You must unplug the charging station and have it replaced by an approved vacuum repair company.
Check:
• If the dust container is full.
• The cleanliness of the filters.
• If there is an object or rubbish which may be obstructing the suction hole underneath the robot.
Several possible reasons exist:
• If the robot did not start from its docking station, it will not return to it. In this case, the robot will return to its starting point.
• If the robot vacuumed in Spot mode, the robot will return to its starting point.
• If the robot is lifted up and put back down on the floor, it will try to relocate itself. If it can't, it will return to its starting point.
Check the following:
• The charging station must not be installed on a rug.
• The charging station must not be exposed to sunlight or near a heat source.
• The free space to the side and the front of the charging station adheres to the instructions in the user manual.
• The plug is correctly connected to the charging station.
• The charger cable is connected to the power supply.
• There are no obstructing objects around the charging base.
• There are no objects near the charging station terminals.
• The charging station is activated (LED indicator is green).

If after checking these elements, the robot still cannot find the base station, contact an approved vacuum repair company.
You can perform the following actions:
• Turn off and then turn on the main power switch.
• Unplug the cable and plug it again into the charging station.
• Make sure that the charging terminals and the sensor windows are not clogged up, then wipe the main body and the charging station with a dry cloth. Do not forget to switch off the main power switch and to turn off the robot before drying carefully.
• Check if there is no obstacle such as a reflective object, a chair, etc. near the charging station.

If after these steps, the automatic charging still does not work well, contact an approved vacuum repair company.
This is a regular case. The vacuum cleaner can remain connected to the docking station without any risk.
Caution: use only designated charger.
Check the following:
• If the switch underneath the robot is correctly in the 'ON' position.
• If the display is lit up. If not, charge up the robot on the base station.
Check the following:
• There are no obstucting objects under the wheels.
• The robot is not blocked due to differences in the floor level.
• There is no error message displayed. (see the troubleshooting and error codes section in your user manual)
You can perform the following actions:
• Make sure there are no obstructing objects within 10 cm of the staircases/gaps.
• Wipe up the sensor windows with a dry cloth.

If after these steps, the problem persists, please contact an approved vacuum repair company.
Make sure that the brush is not obstructed. Clean the brush from entangled hair and threads.
If the brush is damaged, replace it with a new one.
Flashing light and sound signal indicates an error.
For more details about the error description and solution, refer to User Manual.
You can perform the following actions:
• Check if the intake channel is not obstructed.
• Check if the dust bin is well fitted.
• Empty the dust bin if it is full.
• Remove the central brush and clean it.
• Check if the filter is not saturated.

If after these steps, the problem persists, please contact an approved vacuum repair company.
The power-brush safety feature is activated when the robot identifies a risk.

Two situations may occur:
• The power-brush gets stuck: the robot attempts to free it and stops the vacuuming and the power-brush.
• The robot will try to free the brush: if it can't, it will turn off and you will have to clear it manually.

If the power-brush gets stuck in thick carpeting due to its long and/or thick fibers, or the robot has vacuumed the carpet for a long time, the power-brush will stop turning and the robot will continue vacuuming without it.
The robot may experience certain problems represented by error codes.
For more details about the error codes description and solution, refer to User Manual.
The filter may be inserted incorrectly. Try positioning the filter correctly into the slot on its holder.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
No, the appliance is designed for indoor use only.
Yes, the robot vacuum cleaner's sensors do not require the light to process the cleaning session.
The robot vacuum cleaner is efficient on the hard floor surfaces, including tile, parquet, laminate, vinyl, and carpets not thicker than 1,5cm.
Yes, it is recommended to use the robot vacuum cleaner to maintain the cleanliness, but there are still surfaces where the robot does not perform as efficient as non-robotic vacuum cleaners.
Yes, you can schedule a single cleaning session or set up a daily cleaning function through the mobile application.
The robot is limited to one program per day in order to ensure optimum cleaning of all accessible rooms.
Yes. The robot will switch to sleep mode when it is fully recharged.
Yes, the robot will automatically return to the charging base when the battery is low during cleaning.
Once charging is complete, the vacuum cleaner will restart the cleaning process.
This is because the robot didn't start from its docking station: since the robot returns to its starting point, it will go back to where it began vacuuming in Spot mode.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.

Consumerservices